Decahydronaphthalene CAS:91-17-8

  • Product Name:Decahydronaphthalene
  • CAS:91-17-8
  • Molecular formula:C10H18
  • Contact Supplier

Poroduct Description

Files Download:

COA:Downl oad MSDS:Downl oad

Decahydronaphthalene CAS:91-17-8

Decahydronaphthalene CAS:91-17-8 Basic information

Product Name: Decahydronaphthalene
Synonyms: Decahydronaphthalene, 99%, Mixture of cis and trans, anhydrous, AcroSeal;Decahydronaphthalene, SuperDry, J&KSeal;Ten hydrogen naphthalene;Decahydronapht;Decahydronaphthalene [Testing Methods for Sulfur in Crude Oil and Petroleum Products];Decahydronaphtha
CAS: 91-17-8
MF: C10H18
MW: 138.25
EINECS: 202-046-9
Product Categories: Solvents;ACS and Reagent Grade Solvents;Amber Glass Bottles;Carbon Steel Cans with NPT Threads;Reagent;Reagent Grade Solvents;Semi-Bulk Solvents;Solvent Bottles;Solvent by Application;Solvent Packaging Options
Mol File: 91-17-8.mol

Decahydronaphthalene CAS:91-17-8 Chemical Properties

density: 0.896 g/mL at 25 °C(lit.)
Melting point: −125 °C(lit.)
Boiling point: 189-191 °C(lit.)
form: Liquid
storage temp.: Store below +30°C.
Water Solubility: 6 mg/L at 20 ºC
refractive index: n20/D 1.474(lit.)
BRN: 878165
InChIKey: NNBZCPXTIHJBJL-UHFFFAOYSA-N
Fp: 57 °C
solubility: 0.006g/l (experimental)
NIST Chemistry Reference: Naphthalene, decahydro-(91-17-8)
Merck: 14,2846
Stability: Stable. Incompatible with oxidizing agents. Combustible. May form explosive peroxides. Heat and light accelerate peroxide formation.
Sensitive: Hygroscopic
vapor pressure: 42 mm Hg ( 92 °C)
vapor density: 4.76 (vs air)
Odor: Aromatic, like turpentine; mild, characteristic.
explosive limit: 0.7-4.9%, 100°F
Henry s Law Constant: 7.00, 8.37, 10.6, 11.7, and 19.9 (x 10-2 atm?m3/mol) at 10, 15, 20, 25, and 30 °C, respectively (EPICS, Ashworth et al., 1988)
CAS DataBase Reference: 91-17-8(CAS DataBase Reference)
EPA Substance Registry System: Decahydronaphthalene (91-17-8)

项目 

Item

指标

Index

检验结果

Analysis Result

 

试验方法

Test Method

 

外观

Appearance

 

清澈液体Clear Liquid

清澈液体Clear Liquid

目测

Visual Test

 

顺式纯度%Purity%


37.65

 

色谱法 (GC)

 

十氢化萘/wt

Decahydronaphthalene / wt%

 

≥98

99.7

色谱法 (GC)

 

色谱法 (GC)

 


62.05

 

色谱法 (GC)

 

水分含量/wt%

Moisture Content/ wt%

 

 0.1

0.003

GB/T-1113


Decahydronaphthalene Usage And Synthesis
DescriptionDecahydronaphthalene also referred to as Decalin is an organic compound that dissolves rubber, resins, waxes, fats, and oils. It is a colorless, aromatic hydrocarbon which is used as an alternative to turpentine, as a cleaning fluid and as a stain remover. Decahydronaphthalene was also used as a varnish remover for oil-based paintings in the past.
Chemical and Physical PropertiesDecahydronaphthalene has a molecular weight of 138.254 g/mol, a monoisotopic mass of 138.141 g/mol and an exact mass of 138.141 g/mol. It has a heavy atom count of 10 and a complexity of 80.6. It is a clear, colorless liquid with a characteristic odor that resembles that of methanol.
Decahydronaphthalene has a flash point of 134°F and it is less dense than water. It indicates poor solubility in water at 250℃ and its vapours are denser than air. It has a density of 0.89 at 68°F220℃.
Decalin is very soluble in chloroform, ether, methanol and alcohol, and it is miscible with isopropyl alcohol, propyl, esters and a majority of the ketones. Decalin has a boiling point of 383/ 155.50℃ at 760 mm Hg and a melting point of -44°F -40°C.
After long periods of exposure, Decalin forms toxic concentrations of peroxides. When Decalin is heated to decomposition, it released acrid fumes and smoke.
PreparationDecahydronaphthalene is prepared by the hydrogenation of tetralin at low pressure with rhodium as the catalyst. Decalin can be oxidized to yield a significant amount of the hydroperoxide derivative. The cis isomer of Decahydronaphthalene can be oxidized at a higher rate than the combination of the trans and cis isomers, or the trans isomer solely. Therefore, when Decahydronaphthalene is synthesized through the hydrogenation of an unsaturated homolog such as 1,2,3,4-tetrahydronaphthalene for application in the synthesis of hydroperoxide, the resulting product is made of the cis isomer primarily. This method results in Decahydronaphthalene that is saturated with the cis isomer. Such high-pressure processes are technical to execute, and they are relatively expensive. A low-pressure preparation process that entails the hydrogenation of tetralin to obtain cis Decahydronaphthalene is yet to be developed.
The rhodium catalyst is maintained on an inert support such as carbon or alumina, and the reaction is best conducted in the presence of a solvent, which may include a lower saturated carboxylic acid such as acetic acid. Other solvents such as propionic acid, mineral acids and non-acid solvents which may consist of water, hydrocarbons, ethers, esters, amines, amides and alcohol can also be used. The portion of the solvent should be one in which the reaction apparatus can withstand, while in some instances it may be best to omit the solvent. Acetic acid yields a higher rate of the cis isomer when it is applied as the solvent as opposed to the application of alumina as the support substance for the catalyst. The rhodium catalyst is applied as the hydrogenation catalyst, and it is best prepared through reduction of rhodium salts, which may include oxide or chloride. The progress of the hydrogenation reaction may depend on the quantity of the rhodium catalyst applied to the reaction. The tetralin to rhodium ratio is also dependent on the positioning of rhodium with an inert support, the configuration of the support and the apparatus used during the hydrogenation process. For instance, if the rhodium catalyst on an inert support such as carbon or alumina is about 5%, the reaction will yield satisfactory results. Furthermore, approximately 12-25g of the catalyst per mole of the Tetralin may result in satisfactory results. The optimum temperatures for this reaction are 50 C but the rate of the reaction may increase if the temperature is increased gradually from approximately 200 C250 C. The main advantage of this method is the fact that it can be conducted under low pressures of hydrogen, which may be as low as 0.5 atmospheres. Based on the above catalyst concentrations and reaction conditions, the total conversion of tetralin to Decahydronaphthalene may be obtained in about 1-2 hours. This reaction also yields the cis isomer which could be more than 90% of the product, which is relative to the total hydrogenation process which may be ascertained by the absorption of the theoretical amount of hydrogen by tetralin. To attain the desired cis Decahydronaphthalene, the reaction contents should be passed through a conventional fractional distillation to remove any trans isomers. It is fundamental to exercise care while conducting the distillation process using a basic packed column to yield a chromatographically pure cis Decahydronaphthalene.
Hazard StatementsDecalin is a flammable liquid, and it may also cause acute toxicity upon inhalation. It may cause skin irritation/corrosion upon contact as well as severe eye irritation/damage.
Chemical Propertiescolourless liquid
Physical propertiesClear, colorless, flammable liquid with a mild methanol or hydrocarbon-like odor
UsesSolvent for naphthalene, waxes, fats, oils, resins, rubbers; motor fuel and lubricants; cleaning machinery; substitute for turpentine; shoe-creams; stain remover.
Production MethodsDecalin occurs naturally in crude oil and is produced commercially by the catalytic hydrogenation of naphthalene. It is also a product of combustion and is released from natural fires.
DefinitionChEBI: An ortho-fused bicyclic hydrocarbon that is the decahydro- derivative of naphthalene.
General DescriptionA clear colorless liquid with an aromatic odor. Flash point 134°F. Less dense than water and insoluble in water. Vapors heavier than air.
Air & Water ReactionsFlammable. Insoluble in water.
Reactivity ProfileSaturated aliphatic hydrocarbons, such as Decahydronaphthalene, may be incompatible with strong oxidizing agents like nitric acid. Charring of the hydrocarbon may occur followed by ignition of unreacted hydrocarbon and other nearby combustibles. In other settings, aliphatic saturated hydrocarbons are mostly unreactive. They are not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154].
Health HazardInhalation or ingestion irritates nose and throat, causes numbness, headache, vomiting; urine may become blue. Irritates eyes. Liquid de-fats skin and causes cracking and secondary infection; eczema may develop.
Fire HazardHIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Chemical ReactivityReactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.
Safety ProfileModerately toxic by inhalation and ingestion. Questionable carcinogen with experimental carcinogenic and neoplastigenic data. Mildly toxic by skin contact. Human systemic effects by inhalation: conjunctiva irritation, unspecified olfactory and pulmonary system changes. Can cause kidney damage. Mutation data reported. A skin and eye irritant. Flammable liquid when exposed to heat or flame, can react with oxidzing materials. To fight fire, use foam, CO2, dry chemical. When heated to decomposition it emits acrid smoke and fumes.
Environmental fatePhotolytic. The following rate constants were reported for the reaction of decahydronaphthalene and OH radicals in the atmosphere: 1.96 x 10-11 and 2.02 x 10-11 cm3/molecule?sec at 299 K for cis and trans isomers, respectively (Atkinson, 1985). A photooxidation reaction rate constant of 2.00 x 10-11 was reported for the reaction of decahydronaphthalene (mixed isomers) and OH radicals in the atmosphere at 298 K (Atkinson, 1990).
Chemical/Physical. Decahydronaphthalene will not hydrolyze because it has no hydrolyzable functional group.
Purification MethodsThen the organic phase is separated, washed with water, saturated aqueous Na2CO3, again with water, dried with CaSO4 or CaH2 (and perhaps dried further with Na), filtered and distilled under reduced pressure (b 63-70o/10mm). It has also been purified by repeated passage through long columns of silica gel previously activated at 200-250o, followed by distillation from LiAlH4 and storage under N2. Type 4A molecular sieves can be used as a drying agent. Storage over silica gel removes water and other polar substances. [For the separation of cis and trans isomers see Seyer & Walker J Am Chem Soc 60 2125 1938, and Baker & Schuetz J Am Chem Soc 69 1250 1949.]


You need any help?

Related Content

Flomoxef sodium CAS:92823-03-5

Flomoxef sodium CAS:92823-03-5

Acrylic acid-hydroxypropyl acrylate copolymer CAS:55719-33-0

Acrylic acid-hydroxypropyl acr…

Hexapotassium dihydrogen [hexane-1,6-diylbis[nitrilobis(methylene)]]tetrakisphosphonate CAS:53473-28-2

Hexapotassium dihydrogen [hexa…

2-Acrylamido-2-methylpropanesulfonic acid-acrylic acid copolymer CAS:40623-75-4

2-Acrylamido-2-methylpropanesu…

Catocene CAS:37206-42-1

Catocene CAS:37206-42-1

[ethylenebis[nitrilobis(methylene)]]tetrakisphosphonic acid, sodium salt CAS:22036-77-7

[ethylenebis[nitrilobis(methyl…

POLYAMINOPROPYL BIGUANIDE CAS:133029-32-0

POLYAMINOPROPYL BIGUANIDE CAS:…

Fluorescent Brightener 113 CAS:12768-92-2

Fluorescent Brightener 113 CAS…

RHODIUM(III) OXIDE HYDRATE CAS:123542-79-0

RHODIUM(III) OXIDE HYDRATE CAS…

ALKYL KETENE DIMER CAS:144245-85-2

ALKYL KETENE DIMER CAS:144245-…

TRANS-9,10-EPOXYSTEARIC ACID METHYL ESTER CAS:6084-76-0

TRANS-9,10-EPOXYSTEARIC ACID M…

PARECOXIB SODIUM CAS:198470-85-8

PARECOXIB SODIUM CAS:198470-85…

Activated carbon CAS:64365-11-3

Activated carbon CAS:64365-11-…

[1,1 -Bis(diphenylphosphino)ferrocene]dichloropalladium(II) CAS:72287-26-4

[1,1 -Bis(diphenylphosphino)fe…

AMINOPROPYL TERMINATED POLYDIMETHYLSILOXANE CAS:106214-84-0

AMINOPROPYL TERMINATED POLYDIM…

Address:303 FUTURE CITY,LIXIA DISTRICT,JINAN CITY,SHANDONG PROVINCE,CHINA Post Encoding:250000 Email:sales@bosschemical.com
Tel:8613280017993 Mobile:8613280017993 Fax:86-531-68657995

Link