Methylcyclohexane CAS:108-87-2

  • Product Name:Methylcyclohexane
  • CAS:108-87-2
  • Molecular formula:C7H14
  • Contact Supplier

Poroduct Description

Files Download:

COA:Downl oad MSDS:Downl oad

Methylcyclohexane CAS:108-87-2

Methylcyclohexane CAS:108-87-2 Basic information

Product Name: Methylcyclohexane
Synonyms: METHYLCYCLOHEXANE, 99%METHYLCYCLOHEXANE, 99%METHYLCYCLOHEXANE, 99%;Cyclohexane,methyl-;Cyclohxylmethane;heptanaphthene;methyl-cyclohexan;methylecyclohexane;Metylocykloheksan;metylocykloheksan(polish)
CAS: 108-87-2
MF: C7H14
MW: 98.19
EINECS: 203-624-3
Product Categories: cyclic compounds;Analytical Chemistry;Solvents for HPLC & Spectrophotometry;Solvents for Spectrophotometry;HPLC Solvents;ACS and Reagent Grade Solvents;Amber Glass Bottles;Carbon Steel Cans with NPT Threads;ReagentPlus;ReagentPlus Solvent Grade Products;S
Mol File: 108-87-2.mol

Methylcyclohexane CAS:108-87-2 Chemical Properties

density: 0.77 g/mL at 25 °C(lit.)
Melting point: -126.3 °C
Boiling point: 101 °C(lit.)
form: Liquid
storage temp.: Flammables area
Water Solubility: 0.1 g/L (20 ºC)
refractive index: n20/D 1.422(lit.)
BRN: 505972
Fp: 25 °F
solubility: 0.014g/l
NIST Chemistry Reference: Cyclohexane, methyl-(108-87-2)
Merck: 14,6047
Stability: Stable. Very flammable. Incompatible with strong oxidizing agents.
vapor pressure: 37 mm Hg ( 20 °C)
vapor density: 3.4 (vs air)
λmax: λ: 207 nm Amax: 1.00λ: 221 nm Amax: 0.40λ: 232 nm Amax: 0.15λ: 260 nm Amax: 0.05λ: 300-400 nm Amax: 0.01
Exposure limits: NIOSH REL: TWA 400 ppm (1,600 mg/m3), IDLH 1,200 ppm; OSHA PEL: TWA 500 ppm (2,000 mg/m3); ACGIH TLV: TWA 400 ppm (adopted).
explosive limit: 1.1-6.7%(V)
Odor Threshold: 0.15ppm
CAS DataBase Reference: 108-87-2(CAS DataBase Reference)
EPA Substance Registry System: Methylcyclohexane (108-87-2)


Appearance

colorless clear liquid

PH

/

Melting point()

-126.4

Boiling point()

100.3

Density(water=1)

0.79

Density(air=1)

3.39

saturated vapor pressure(kPa) 

5.33(22)

heat of combustion(KJ/mol)

4563.7

critical temperature()

299.1

critical pressure(MPa)

3.48

2-Ethyl Hexanol /water partition coefficient

3.2

Flash point()

-4

ignition temperature()

250

UEL%(V/V)

6.7

LEL%(V/V) 

11.2

decomposition temperature

/

Viscosity(mPa.s)

/

Odor thresholds(mg/m3)

/

Methylcyclohexane Usage And Synthesis
Chemical PropertiesMethylcyclohexane, an alkene, is a colorless liquid with a faint benzene-like odor. The odor threshold is 630 ppm (this is above the OEL).
Physical propertiesClear colorless, very flammable liquid with a faint odor similar to benzene or cyclohexane. An odor threshold concentration of 150 ppbv was reported by Nagata and Takeuchi (1990).
UsesSolvent; starting material in the synthesis of toluene.
UsesSolvent; organic synthesis
Production MethodsMethylcyclohexane is separated by distillation from crude petroleum oils, and also produced by hydrogenation of toluene, reaction of benzene with methane, or acidic hydrocracking of polycyclic aromatics.
Synthesis Reference(s)Journal of the American Chemical Society, 77, p. 5099, 1955 DOI: 10.1021/ja01624a044
The Journal of Organic Chemistry, 41, p. 1393, 1976
Synthesis, p. 481, 1984
General DescriptionA clear colorless liquid with a petroleum-like odor. Flash point 25°F. Less dense than water and insoluble in water. Vapors heavier than air.
Air & Water ReactionsHighly flammable. Insoluble in water.
Reactivity ProfileSaturated aliphatic hydrocarbons, such as Methylcyclohexane, may be incompatible with strong oxidizing agents like nitric acid. Charring of the hydrocarbon may occur followed by ignition of unreacted hydrocarbon and other nearby combustibles. In other settings, aliphatic saturated hydrocarbons are mostly unreactive. They are not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents.
HazardFlammable, dangerous fire risk. Lowerexplosive limit 1.2% in air. Upper respiratory tractirritant, central nervous system impairment, liverand kidney damage.
Health HazardHarmful if inhaled or swallowed. Vapor or mist is irritating to the eyes, mucous membrane and upper respiratory tract and skin. Narcotic effects and dermititis.
Fire HazardSpecial Hazards of Combustion Products: Vapor may travel considerable distance to a source of ignition and flashback containing explosion may occur during fire conditions. Forms explosive mixtures in air.
Safety ProfileModerately toxic by ingestion. Mildly toxic by inhalation and skin contact. This material does not cause irritation to the eyes and nose, and, even at the level of 500 ppm, exhbits only a very faint odor. Therefore, it cannot be said to have any warning properties. It is believed to be about three times as toxic as hexane, and has caused death by tetanic spasm in animals. In sublethal concentrations, it causes narcosis and anesthesia. Dangerous fire hazard and moderate explosion hazard when exposed to heat, flame, or oxidzers. To fight fire, use foam, CO2, dry chemical. When heated to decomposition it emits acrid smoke and fumes.
Potential ExposureMethylcyclohexane is used as a solvent for cellulose derivatives particularly with other solvents; and as an organic intermediate in organic synthesis. A component of jet fuel.
SourceSchauer et al. (1999) reported methylcyclohexane in a diesel-powered medium-duty truck exhaust at an emission rate of 620 μg/km.
Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission rate of methylcyclohexane was 8.6 mg/kg of pine burned. Emission rates of methylcyclohexane were not measured during the combustion of oak and eucalyptus.
California Phase II reformulated gasoline contained methylcyclohexane at a concentration of 7.87 mg/kg. Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without catalytic converters were 1.86 and 274 mg/km, respectively (Schauer et al., 2002).
Environmental fateBiological. May be oxidized by microbes to 4-methylcyclohexanol, which may oxidize to give 4-methylcycloheptanone (Dugan, 1972).
Photolytic. Based on a photooxidation rate constant 1.04 x 10-11 cm3/molecule?sec for the reaction of cyclohexane and OH radicals in the atmosphere at 298 K, the estimated lifetime of methylcyclohexane is 13 h (Altshuller, 1991).
Chemical/Physical. Complete combustion in air produces carbon dioxide and water vapor. Methycyclohexane will not hydrolyze in water because it does not contain a hydrolyzable functional group.
Complete combustion in air yields carbon dioxide and water. Incomplete combustion also yields carbon monoxide.
ShippingUN2296 Methylcyclohexane, Hazard Class: 3; Labels: 3-Flammable liquid.
Purification MethodsPassage through a column of activated silica gel gives material transparent down to 220nm. It can also be purified by passage through a column of activated basic alumina, or by azeotropic distillation with MeOH, followed by washing out the MeOH with H2O, drying and distilling. Methylcyclohexane can be dried with CaSO4, CaH2 or sodium. It has also been purified by shaking with a mixture of conc H2SO4 and HNO3 in the cold, washing with H2O, drying with CaSO4 and fractionally distilling it from potassium. Percolation through a Celite column impregnated with 2,4-dinitrophenylhydrazine (DNPH), phosphoric acid and H2O (prepared by grinding 0.5g DNPH with 6mL 85% H3PO4, then mixing with 4mL of distilled H2O and 10g of Celite) removes carbonyl-containing impurities. [Cowan et al. J Chem Soc 1865 1939, Beilstein 5 III 65, 5 IV 94.]
IncompatibilitiesVapor may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Attacks some plastics, rubber and coatings
Waste DisposalDissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.


You need any help?

Related Content

Dapagliflozin propanediol monohydrate CAS:960404-48-2

Dapagliflozin propanediol mono…

Propanoic acid, 2-hydroxy-, C12-15-alkyl esters CAS:93925-36-1

Propanoic acid, 2-hydroxy-, C1…

BIBF-1120 CAS:928326-83-4

BIBF-1120 CAS:928326-83-4

Polyquaternium-4 CAS:92183-41-0

Polyquaternium-4 CAS:92183-41-…

POLY-GAMMA-GLUTAMIC ACID CAS:84960-48-5

POLY-GAMMA-GLUTAMIC ACID CAS:8…

3-(trichlorovinyl)anilinium chloride CAS:81972-27-2

3-(trichlorovinyl)anilinium ch…

Isometheptene mucate CAS:7492-31-1

Isometheptene mucate CAS:7492-…

Gadoteric acid CAS:72573-82-1

Gadoteric acid CAS:72573-82-1

Isopropyl tri(dioctylpyrophosphate) titanate CAS:67691-13-8

Isopropyl tri(dioctylpyrophosp…

[4-(3-Methyoxypropoxy)-3-methyl-2-pyridinyl]methanol hydrochloride CAS:675198-19-3

[4-(3-Methyoxypropoxy)-3-methy…

Tetraisopropyl di(dioctylphosphate) titanate CAS:65460-52-8

Tetraisopropyl di(dioctylphosp…

Dipotassium methanedisulfonate CAS:6291-65-2

Dipotassium methanedisulfonate…

Dowfax 3B2 CAS:58318-10-8

Dowfax 3B2 CAS:58318-10-8

Myristyl chloroformate CAS:56677-60-2

Myristyl chloroformate CAS:566…

(1S,3S,5R,6R)-(4-nitrophenylmethyl)-1-dioxo-6-phenylacetamido-penam-3-carboxylate CAS:54275-93-3

(1S,3S,5R,6R)-(4-nitrophenylme…

Address:303 FUTURE CITY,LIXIA DISTRICT,JINAN CITY,SHANDONG PROVINCE,CHINA Post Encoding:250000 Email:sales@bosschemical.com
Tel:8613280017993 Mobile:8613280017993 Fax:86-531-68657995

Link